North East Xterra Club https://nexterra.org/forums/ |
|
Rear axel seal - oops!! https://nexterra.org/forums/viewtopic.php?f=51&t=9702 |
Page 1 of 1 |
Author: | ErikaJayneX [ Tue Aug 28, 2018 2:39 pm ] |
Post subject: | Rear axel seal - oops!! |
So I didn’t do my vent mod and now paying the price after ECXC bc I didn’t change the diff fluid right after... so I am leaking from my axel seal (pretty sure) My plan and tell me if this is good or what... Call cherry hill Nissan and talk with Brian? On parts I have 08 off-road with the elocker so I have to have the bearing pressed on? I think just have a mechanic do all that stuff? Then put it all back in at home.... does this sound right.. . I saw videos on frontiers getting done but I’m still a little timid on doing it. Comments concerns helpful insights please!!! |
Author: | murphy [ Tue Aug 28, 2018 5:08 pm ] |
Post subject: | Re: Rear axel seal - oops!! |
One of the seals on my Frontiers rear axle went. I had a shop do it. Pulling the axle wasn’t my worry. I saw a how to for it. Cutting off the old seal and bearing with a grinder, then using a pipe of the right diameter and a hammer to seat it all again. I wasn’t interested. I think it ended up being 4 hours labor plus parts. I bet it would be half that if you removed and installed it, and brought it to a shop for the rest. |
Author: | BKxterra718 [ Tue Aug 28, 2018 5:57 pm ] |
Post subject: | Re: Rear axel seal - oops!! |
I recommend shop press to seat the bearing back on. Grinder works great to get it off, cut it diagonally, then hammer and chisel punch. Sent from my SM-N950U using Tapatalk |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |