| North East Xterra Club http://nexterra.org/forums/ |
|
| Titan sawp PRG http://nexterra.org/forums/viewtopic.php?f=40&t=8434 |
Page 1 of 1 |
| Author: | leo [ Mon Jun 08, 2015 11:53 am ] |
| Post subject: | Titan sawp PRG |
Im trying to get in touch with them for my titan sawp i order but that was 2 mont ago it always said leave a voicemail and nobody calls me back any other way to get in touch with them ? Sent from my SM-G860P using Tapatalk |
|
| Author: | MtDewMike [ Mon Jun 08, 2015 1:06 pm ] |
| Post subject: | Re: Titan sawp PRG |
What number are you using? Try to contact Greg in the morning; even though he's on the west coast, he usually takes calls pretty early. |
|
| Author: | c3PO [ Mon Jun 08, 2015 4:56 pm ] |
| Post subject: | Re: Titan sawp PRG |
Greg is very hard to get a hold of by email. Your best bet is to call him right when his shop opens (west coast time). Thats what I did and it works most of the time. |
|
| Author: | BKxterra718 [ Tue Jun 09, 2015 7:41 am ] |
| Post subject: | Re: Titan sawp PRG |
Yea he called spoke to them. Question though, is it commin for titan front diff's to come without the flanges to mount the axles to? Cause the one Leo got from the junkyard came without them. |
|
| Author: | c3PO [ Tue Jun 09, 2015 10:19 am ] |
| Post subject: | Re: Titan sawp PRG |
Flanges for the CV axles? They are supposed to come with them. Maybe the junker couldn't get the CV bolts off and pulled the inner half axle shaft/flange with it. |
|
| Author: | c3PO [ Tue Jun 09, 2015 10:22 am ] |
| Post subject: | Re: Titan sawp PRG |
If theres a seal there, check and replace that too. Or find a different diff. Or find a different diff you can Frankenstein from. |
|
| Author: | Bklyn.X [ Tue Jun 09, 2015 10:45 am ] |
| Post subject: | Re: Titan sawp PRG |
BKxterra718 wrote: Yea he called spoke to them. Question though, is it commin for titan front diff's to come without the flanges to mount the axles to? Cause the one Leo got from the junkyard came without them.  I thought the axles push into the diff and get captured on a 2nd Gen, not bolted to a flange like on a 1st Gen?
|
|
| Author: | Bklyn.X [ Tue Jun 09, 2015 11:10 am ] |
| Post subject: | Re: Titan sawp PRG |
Ah, I see, the Titan Diff has a flange to accept Titan or Pathy axles.  So what's the parts list on this mod? |
|
| Author: | MtDewMike [ Tue Jun 09, 2015 1:18 pm ] |
| Post subject: | Re: Titan sawp PRG |
How-to: Full Titan Swap! How-to: Source a Titan Swap Titan Swap Discussion Thread Titan Swap Registry: |
|
| Author: | Bklyn.X [ Tue Jun 09, 2015 1:27 pm ] |
| Post subject: | Re: Titan sawp PRG |
Ha! Rook. Is he still in the game? |
|
| Author: | Ripper [ Tue Jun 09, 2015 1:46 pm ] |
| Post subject: | Re: Titan sawp PRG |
Bklyn.X wrote: Ha! Rook. Is he still in the game? Yes and no. He still has his X as far as I know. But he hasnt returned a call or text I sent to him. But then again I havent tried to get hold of him for over a year. Hes pretty much said goodbye to this chapter of his life when he got married. |
|
| Author: | c3PO [ Tue Jun 09, 2015 3:00 pm ] |
| Post subject: | Re: Titan sawp PRG |
Bklyn.X wrote: Ah, I see, the Titan Diff has a flange to accept Titan or Pathy axles. So what's the parts list on this mod? What do you have so far? I wish I was closer, Id swing by and help. |
|
| Author: | BKxterra718 [ Tue Jun 09, 2015 4:59 pm ] |
| Post subject: | Re: Titan sawp PRG |
Gotta ask leo that question |
|
| Author: | leo [ Wed Jun 10, 2015 3:24 pm ] |
| Post subject: | Re: Titan sawp PRG |
I spoke with them and they gonna ship everything like 2 week i gonna have it i have to get the part for the diff next week everything i hope and i will be ok with the titan sawp  I hope they gonna send it this time Mo like the other 3 time i call them and they told me almot the same thing Sent from my SM-G860P using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|