North East Xterra Club http://nexterra.org/forums/ |
|
body lift steering http://nexterra.org/forums/viewtopic.php?f=22&t=8645 |
Page 1 of 1 |
Author: | Frontier4x [ Sat Oct 31, 2015 8:25 pm ] |
Post subject: | body lift steering |
Hey guys I just did a 2" body lift on my 2nd Gen frontier All went pretty well although it was a struggle to deal with sized bolts Before lifting, I loosened the upper and lower steering shafts bolts. They didn't move though Even when I tapped them with a hammer and crowbar. The steering was way stiff, so I loosened the steering bolt in the cab and turned wheel 6x both ways then retightened. It's better now, but it's still stiff to the left, clunks when turning over driveways Any ideas? I ordered the extension, but if I can fix it cheaper then I'd be happy |
Author: | MtDewMike [ Sat Oct 31, 2015 9:26 pm ] |
Post subject: | Re: body lift steering |
Who did you get the kit through? And where did you order an extension from? I got my kit through Brian at Cherry Hill, but we didn't have any issues with the steering. Sent from my SAMSUNG-SGH-I337 using Tapatalk |
Author: | Frontier4x [ Sat Oct 31, 2015 11:18 pm ] |
Post subject: | Re: body lift steering |
4x4 parts / automotive customizers |
Author: | MtDewMike [ Mon Nov 02, 2015 2:13 pm ] |
Post subject: | Re: body lift steering |
You know who might be able to throw in some ideas is Ernie; he did a body lift for a second gen Fronty a couple of years ago down in RI. Ernie, do you remember any issues with the steering? |
Author: | Bass4Runner [ Mon Nov 02, 2015 8:22 pm ] |
Post subject: | Re: body lift steering |
No we had no concerns , but It does need to slip out some... around 1/2 to 3/4 of an inch but the shaft should slip enough for the lift. did you pb the slip shaft? |
Author: | Frontier4x [ Tue Nov 03, 2015 3:11 pm ] |
Post subject: | Re: body lift steering |
No I didn't pb that one Solid idea The steering shaft ext comes tomorrow though |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |